Description

Parallaxx Mobile and Walk-in ConstructSafe Testing

• We understand it can be costly and an organisational nightmare to take all your workers off the road at once to undertake testing so we’ve setup walk in testing:
• Your workers can turn up any time during the day and undertake the test at our central Auckland location.
• Testing from 7am to 6pm
• All equipment is provided, the only thing your workers need is a valid ID.
• If required, we offer additional health and safety training prior to testing on request for new to the industry workers.

Got a big group needing tested? We’ll come to you.

• We’ve got 18 4G tablets, so we can come to your premises and test up to 18 people at a time, any time of the day or night and don’t need to connect to your WiFi.
• All you need is a board room or lunch room, somewhere quiet to conduct the test,
• Allow 1-2 hours depending on the number of people

ConstructSafe Tiers:

Parallaxx offer testing for:

• ConstructSafe Tier 1
• ConstructSafe Tier 2
• ConstructSafe Tier 3
• ConstructSafe Tier 4
• ConstructSafe Tier 5

Pricing:

• Walk in testing: $130.00 + GST per person (per two attempts, a third attempt at the test incurs another $130.00 + GST fee for two more attempts)
• Mobile testing:
• 10 attendees: $130.00 + GST per person (per two attempts)
• Less than 10 attendees: $125.00 + GST per hour including travel plus $80.00 + GST per person (per two attempts) for the ConstructSafe registration and administration

Payment Options:

• Credit card
• Invoice

What to Bring:

• A valid form of identification, for example an NZ drivers license, passport or firearms license.
• If you do not have either of these forms of identification an alternative can be brought and sent to ConstructSafe for approval, this normally takes no longer than 15 minutes.
• No ID, no test

About the ConstructSafe Tiers:

ConstructSafe Tier 1: For everyone, specially workers on site.

Workers will demonstrate competency and knowledge on how to stay safe at worksites on the following areas:

• Site access
• Hazardous Substances
• Confined Spaces
• Drug and Alcohol awareness
• Emergency Situations
• Environmental awareness
• Manual handling
• Working around plant
• Signage at worksites
• Traffic management
• Underground and overhead services
• Vibration
• Working at height

Prerequisites:

• None, but some study and experience working at construction sites is highly beneficial

ConstructSafe Tier 2: For Tradies

• The best way to show that you are a competent worker on site.
• Helps you to prove that you are a safer worker than others, which is attractive to employers.
• For each Tier 2 competency, industry has come together to solve our common problem and created one agreed standard.
• For you, this means more time at work and less time in a site office.
• Some Tier 2 competencies also have 'In field assessment' where you can demonstrate your skills as you work, often removing the need to sit theory tests again.

Tier 2 Tests:

• A theory test in the classroom followed by on-site practical assessments.
• Electrician
• Scaffolder
• Excavator
• Roller

Prerequisites:

• ConstructSafe Tier 1

ConstructSafe Tier 3: Supervisors and managers of Health and Safety

• For companies wanting to ensure their supervisor or managers competency in influencing and managing health and safety in the workplace.
• The Tier 3 test is not easy, even for experienced health and safety managers and we recommend all candidates study the framework and resource material thoroughly.
• You will not be able to pass the test without doing so – trust us, we’ve tested some of the most experienced people in the industry.
• If you can pass this test, you can truly say that you have a thorough understanding of health and safety.

The ConstructSafe Tier 3 Framework is divided into seven modules:

1. Supervising Safely
2. Health and Safety Supervisory Responsibilities
3. Hazard Identification and Classification
4. Risk Assessment
5. Managing Risks
6. Investigating Incidents
7. Measuring Performance

Prerequisites:

• ConstructSafe Tier 1
• Unit Standard 4098 or a relevant adult education assessor training
• Be a supervisor or manager in the workplace
• Your company must be committed to ConstructSafe to access the training materials and modules for Tier 3 study. Signup your company here.

ConstructSafe Tier 4

Content coming soon…

ConstructSare Tier 5

Content coming soon…  

Description

Parallaxx Mobile and Walk-in ConstructSafe Testing

• We understand it can be costly and an organisational nightmare to take all your workers off the road at once to undertake testing so we’ve setup walk in testing:
• Your workers can turn up any time during the day and undertake the test at our central Auckland location.
• Testing from 7am to 6pm
• All equipment is provided, the only thing your workers need is a valid ID.
• If required, we offer additional health and safety training prior to testing on request for new to the industry workers.

Got a big group needing tested? We’ll come to you.

• We’ve got 18 4G tablets, so we can come to your premises and test up to 18 people at a time, any time of the day or night and don’t need to connect to your WiFi.
• All you need is a board room or lunch room, somewhere quiet to conduct the test,
• Allow 1-2 hours depending on the number of people

ConstructSafe Tiers:

Parallaxx offer testing for:

• ConstructSafe Tier 1
• ConstructSafe Tier 2
• ConstructSafe Tier 3
• ConstructSafe Tier 4
• ConstructSafe Tier 5

Pricing:

• Walk in testing: $130.00 + GST per person (per two attempts, a third attempt at the test incurs another $130.00 + GST fee for two more attempts)
• Mobile testing:
• 10 attendees: $130.00 + GST per person (per two attempts)
• Less than 10 attendees: $125.00 + GST per hour including travel plus $80.00 + GST per person (per two attempts) for the ConstructSafe registration and administration

Payment Options:

• Credit card
• Invoice

What to Bring:

• A valid form of identification, for example an NZ drivers license, passport or firearms license.
• If you do not have either of these forms of identification an alternative can be brought and sent to ConstructSafe for approval, this normally takes no longer than 15 minutes.
• No ID, no test

About the ConstructSafe Tiers:

ConstructSafe Tier 1: For everyone, specially workers on site.

Workers will demonstrate competency and knowledge on how to stay safe at worksites on the following areas:

• Site access
• Hazardous Substances
• Confined Spaces
• Drug and Alcohol awareness
• Emergency Situations
• Environmental awareness
• Manual handling
• Working around plant
• Signage at worksites
• Traffic management
• Underground and overhead services
• Vibration
• Working at height

Prerequisites:

• None, but some study and experience working at construction sites is highly beneficial

ConstructSafe Tier 2: For Tradies

• The best way to show that you are a competent worker on site.
• Helps you to prove that you are a safer worker than others, which is attractive to employers.
• For each Tier 2 competency, industry has come together to solve our common problem and created one agreed standard.
• For you, this means more time at work and less time in a site office.
• Some Tier 2 competencies also have 'In field assessment' where you can demonstrate your skills as you work, often removing the need to sit theory tests again.

Tier 2 Tests:

• A theory test in the classroom followed by on-site practical assessments.
• Electrician
• Scaffolder
• Excavator
• Roller

Prerequisites:

• ConstructSafe Tier 1

ConstructSafe Tier 3: Supervisors and managers of Health and Safety

• For companies wanting to ensure their supervisor or managers competency in influencing and managing health and safety in the workplace.
• The Tier 3 test is not easy, even for experienced health and safety managers and we recommend all candidates study the framework and resource material thoroughly.
• You will not be able to pass the test without doing so – trust us, we’ve tested some of the most experienced people in the industry.
• If you can pass this test, you can truly say that you have a thorough understanding of health and safety.

The ConstructSafe Tier 3 Framework is divided into seven modules:

1. Supervising Safely
2. Health and Safety Supervisory Responsibilities
3. Hazard Identification and Classification
4. Risk Assessment
5. Managing Risks
6. Investigating Incidents
7. Measuring Performance

Prerequisites:

• ConstructSafe Tier 1
• Unit Standard 4098 or a relevant adult education assessor training
• Be a supervisor or manager in the workplace
• Your company must be committed to ConstructSafe to access the training materials and modules for Tier 3 study. Signup your company here.

ConstructSafe Tier 4

Content coming soon…

ConstructSare Tier 5

Content coming soon…  

Similar courses